vol. 62 (1) 2026

Aluminium thermal reduction process for preparing ferrosilicon and alumina from fly ash

Qixiang SuORCID iD, Qingchun YuORCID iD, Xiaomei ZhuORCID iD, Tianlie XiaoORCID iD, Biao YeORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 1-12. DOI:10.2298/JMMB250715001S
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 08 May 2026
(Received 15 July 2025; Accepted 25 March 2026)
doiSerbia

Continue reading “Aluminium thermal reduction process for preparing ferrosilicon and alumina from fly ash”

Influence of holding time during rapid tempering after rapid austenitization on the microstructure and mechanical properties of low carbon steel

Putu Reidita Artha PutriORCID iD, Akhmad Ardian KordaORCID iD, Eddy Agus BasukiORCID iD, Fadhli MuhammadORCID iD, Tria LaksanaORCID iD, Djalu Amardanta PriambudiORCID iD, Imam Al SyaukhaniORCID iD, Septa Berti SantosaORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 13-24. DOI:10.2298/JMMB250918002P
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 08 May 2026
(Received 18 September 2025; Accepted 25 February 2026)
doiSerbia

Continue reading “Influence of holding time during rapid tempering after rapid austenitization on the microstructure and mechanical properties of low carbon steel”

Effects of scanning speed on mechanical, wear property, and corrosion behavior of CP-Ti fabricated by the selective laser melting technique

Weimin ChenORCID iD, Jinlong HuORCID iD, Zhuhao WenORCID iD, Haoqin LinORCID iD, Liying SunORCID iD, Qiang ZhangORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 25-39. DOI:10.2298/JMMB250903003C
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 08 May 2026
(Received 03 September 2025; Accepted 06 April 2026)
doiSerbia

Continue reading “Effects of scanning speed on mechanical, wear property, and corrosion behavior of CP-Ti fabricated by the selective laser melting technique”

Optimization of smelting process of magnesium based on machine learning

Xin LiORCID iD, Junhua GuoORCID iD, Jianglei FanORCID iD, Yongbiao WangORCID iD, Yanyan LiORCID iD, Xiaoguang ZhouORCID iD, Shuxia TianORCID iD, Feng MaoORCID iD, Kunlin MiaoORCID iD, Shizhong WeiORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 41-52. DOI:10.2298/JMMB251014004L
Full text (pdf)
Supplementary material (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 08 May 2026
(Received 14 October 2025; Accepted 30 April 2026)
doiSerbia

Continue reading “Optimization of smelting process of magnesium based on machine learning”

A comparative study of mechanical behaviour of heat-treated 3D printed In-718 and ASTM F75 alloys across multiple length scales

Muhammad ZubairORCID iD, Khushnuda NurORCID iD, Ehsan ul HaqORCID iD, Furqan AhmedORCID iD, Muhammad Adil JavedORCID iD, Muhammad Junaid KhanORCID iD, Muhammad Mubeen NaveedORCID iD, Mirza Mueed ul HassanORCID iD, Ahmed AbdullahORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 53-67. DOI:10.2298/JMMB251111005Z
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 14 May 2026
(Received 11 November 2025; Accepted 05 May 2026)
doiSerbia

Continue reading “A comparative study of mechanical behaviour of heat-treated 3D printed In-718 and ASTM F75 alloys across multiple length scales”

Structure, mechanical properties, and corrosion resistance of low-nickel nitrogen-alloyed austenite stainless steel

Sarkis MuradianORCID iD, Yan SunORCID iD, Qian ZhongORCID iD, Mingzhou LiuORCID iD, Chen SuORCID iD, Wenqiang SunORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 69-79. DOI:10.2298/JMMB251009006M
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 14 May 2026
(Received 14 October 2025; Accepted 30 April 2026)
doiSerbia

Continue reading “Structure, mechanical properties, and corrosion resistance of low-nickel nitrogen-alloyed austenite stainless steel”

Phase and roughness analysis of nanocrystalline coatings based on 310S steel with aluminum additions

Mariola SpalikORCID iD, Barbara KucharskaORCID iD, Aneta JakubusORCID iD, Grzegorz KrzywoszyjaORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 81-90. DOI:10.2298/JMMB250811007S
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 15 May 2026
(Received 09 October 2025; Accepted 07 May 2026)
doiSerbia

Continue reading “Phase and roughness analysis of nanocrystalline coatings based on 310S steel with aluminum additions”

Influence of growth velocity v and temperature gradient G on the interlamellar spacing λ of FeC unidirectionally crystallized eutectic

Adrian ŚwiątkowskiORCID iD, Tomasz WiktorORCID iD, Dariusz KopycińskiORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 91-101. DOI:10.2298/JMMB250804008S
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 21 May 2026
(Received 04 August 2025; Accepted 19 May 2026)
doiSerbia

Continue reading “Influence of growth velocity v and temperature gradient G on the interlamellar spacing λ of FeC unidirectionally crystallized eutectic”

Investigating the Al-Cr-La ternary system: Al-rich corner phase equilibria at 600 °C

Tilen BalaškoORCID iD, Adam ZakyORCID iD, Simona DelsanteORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 103-113. DOI:10.2298/JMMB260115009B
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 21 May 2026
(Received 15 January 2026; Accepted 21 May 2026)
doiSerbia

Continue reading “Investigating the Al-Cr-La ternary system: Al-rich corner phase equilibria at 600 °C”

Extraction and recovery of zinc, potassium, and sodium from blast furnace dust by ultrasonic-assisted ammonia leaching

JianTao JuORCID iD, YongWei HuORCID iD, Ning LuoORCID iD, WenKe GuoORCID iD, Qiang BiORCID iD

J. Min. Metall. Sect. B-Metall., 62 (1) (2026) 115-129. DOI:10.2298/JMMB251025011J
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 05 June 2026
(Received 25 October 2025; Accepted 04 June 2026)
doiSerbia

Continue reading “Extraction and recovery of zinc, potassium, and sodium from blast furnace dust by ultrasonic-assisted ammonia leaching”