Friction and wear behaviors of a high nitrogen austenitic stainless steel Fe-19Cr-15Mn-0.66N
J. Min. Metall. Sect. B-Metall., 57 (2) (2021) 285-293 DOI:10.2298/JMMB201026025Q
Full text (pdf)
Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX
Available online 08 March 2021
(Received 26 October 2020; Accepted 08 March 2021)
doiSerbia
Abstract
The friction and wear behaviors of a Fe-19Cr-15Mn-0.66N high nitrogen austenitic stainless steel (HNSS) were investigated. Tribological investigations were carried out under different applied loads of 5 N, 10 N, 15 N, and 20 N. Scanning electron microscope (SEM) and laser scanning confocal microscope (LSCM) were used to understand the wear mechanisms under different loads and the reasons for the improved wear resistance. The lower friction coefficient and improved wear resistance were observed with the increase in applied loads. Under a higher load, the friction enhanced the work hardening ability of HNSS, which in turn improved its surface hardness and thus the increased wear resistance of HNSS.
Keywords: High nitrogen austenite stainless steel; Wear; Work hardening; Friction coefficient
Correspondence Address:
Y.-X. Qiao *; J. Chen **; Z.-B. Zheng ***,
a School of Materials Science and Engineering,
Jiangsu University of Science and Technology, Zhenjiang, China;
d Guangdong Key Laboratory of Metal Toughening Technology and Application,
Guangdong Institute of Materials and Processing, Guangzhou, China;,
email: yxqiao@just.edu.cn *; jchen496@uwo.ca **; zbzheng712003@163.com ***;
This work is licensed under a
Creative Commons Attribution-
ShareAlike 4.0 International License