A. Liu, Z. Shi, K. Xie, X. Hu, B. Gao, M. Korenko, Z. Wang

Extraction of Al–Si master alloy and alumina from coal fly ash

J. Min. Metall. Sect. B-Metall. 53 (2) B (2017) 155-162. DOI:10.2298/JMMB160616006L
Full text (pdf),

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX

Abstract

Coal fly ash from coal power plants is a potential raw material for the production of alumina. An objective aluminothermic reduction method for the preparation of Al-Si master alloy and alumina from coal fly ash was investigated. The kinetic analysis using non-isothermal differential scanning calorimetry indicated that the reduction of Al6Si2O13, Fe2O3, and TiO2 by aluminum in coal fly ash occurs at 1618 K, 1681 K, and 1754 K, respectively. Moreover, the influence of reaction temperature on product composition was studied. The phases and morphologies of the products obtained by the aluminothermic reduction of coal fly ash at 1373-1773 K were analyzed by X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy, respectively. The results from X-ray diffraction show that no oxide reduction has taken place at 1373 K and 1473K, the compositions of the product obtained by aluminothermic reduction of fly ash at 1573K- 1673 K are Al 2O3, mullite, Al and Si, while the compositions of the product at 1773 K are Al2O3, Al, and Si. In addition, the chemical compositions of Al-Si alloy obtained at 1773 K are 86.81 wt% Al and 13.19 wt% Si.
Keywords: Coal fly ash; Aluminothermic reduction; Al–Si master alloy; Alumina enrichment

Correspondence Address:
Z. Shi, School of Metallurgy,
Northeastern University, Shenyang, China
znshi@mail.neu.edu.cn

Creative Commons License
This work is licensed under a
Creative Commons Attribution-
ShareAlike 4.0 International License