M. Najafi, H. Mirzadeh , M. Alibeyki

Tempering of deformed and as-quenched martensite in structural steel

J. Min. Metall. Sect. B-Metall. 55 (1) B (2019) 95-99. DOI:10.2298/JMMB180813002N
Full text (pdf)

Export manuscript information:
RIS Format (EndNote, Reference Manager), BibTeX


Annealing of deformed martensite (high-temperature tempering) in st37 steel was studied. Different reductions in thickness were considered and compared with the behavior of as-quenched martensite during tempering. Tempering of the asquenched martensite was accompanied by the formation of carbide particles, incomplete disappearance of the lath martensite morphology, and continuous decrease in hardness until reaching low values. However, during tempering of the cold rolled martensite, the precipitation of carbides in the lamellar structure, development of distinct equiaxed ultrafine grains through a continuous recrystallization mechanism, and a sudden hardness drop were characterized. The importance of cold rolling reduction and its amount were also discussed.
Keywords: Low carbon steels; Quench and tempering; Cold rolling; Continuous recrystallization; Hardness.

Correspondence Address:
H. Mirzadeh, School of Metallurgy and Materials Engineering,
College of Engineering, University of Tehran, Tehran, Iran
email: hmirzadeh@ut.ac.ir

Creative Commons License
This work is licensed under a
Creative Commons Attribution-
ShareAlike 4.0 International License